Based on   Direct Digital Synthesized (DDS) technology and unique FPGA design,   SFG-2000/2100 Series  
              Function Generators are built with exceptionally high   performance far exceeding that of any conventional  
              function generators, at a   very competitive price. Stable output frequency, low distortion, and fine  
              frequency resolution are the most remarkable characteristics of this product   series.  | 
          
          
            MAIN  | 
          
          
            Frequency   Range 
              (For Sine, Square)  | 
            1Hz~20MHz  | 
          
          
            Frequency   Range 
              (For Triangle)  | 
            1Hz~1MHz  | 
          
          
            Frequency   Resolution  | 
            1Hz   | 
          
          
            Frequency   Stability  | 
            ∮ 20   ppm  | 
          
          
            Frequency   Accuracy  | 
            ∮ 20   ppm   | 
          
          
            Frequency   Aging   | 
            ∮ 5   ppm / year  | 
          
          
            Output   Function  | 
            Sine, Square,   Triangle  | 
          
          
            Amplitude   Range  | 
            2mV~10Vpp(into   50?load)  | 
          
          
            Impedance  | 
            50?∮10?  | 
          
          
            Attenuator  | 
            -20dB∮1dB⊙2   | 
          
          
            DC   Offset  | 
            ≌-5V°≈+5V(into   50?load)   | 
          
          
            Duty Control   Range   | 
            20% to 80%,   2Hz~1MHz (Square wave only)   | 
          
          
            Range   Resolution   | 
            1%   | 
          
          
            Display  | 
            9 digits LED   display   | 
          
          
            SINE   WAVE  | 
          
          
            Harmonics   Distortion  | 
            -55dBc,0.1Hz°200kHz;   -40dBc,0.2MHz°4MHz; -30dBc,4MHz°10MHz 
              (Specification applied to both TTL/CMOS   OFF and from MAX. to 1/10 level)  | 
          
          
            Flatness   (Relative to 1kHz)  | 
            ≌∮ 0.3dB,0.1Hz°1MHz; ≌∮ 0.5dB,1MHz°4MHz; ≌∮ 2dB, 4MHz°10MHz  | 
          
          
            TRIANGLE   WAVE  | 
          
          
            Linearity  | 
            ≠98?,0.1Hz°100kHz;≠95?,100kHz°1MHz   | 
          
          
            SQUARE   WAVE  | 
          
          
            Symmetry  | 
            ∮ 1%   of period +4ns to 0.1Hz°100kHz   | 
          
          
            Rise or Fall   Time  | 
            ∝25ns at   maximum output.(into 50?load)  | 
          
          
            CMOS   OUTPUT  | 
          
          
            Level  | 
            4Vpp∮1Vpp°15Vpp∮1Vpp   adjustable; Rise or Fall Time ∝120ns  | 
          
          
            TTL   OUTPUT  | 
          
          
            Level  | 
            ≠3Vpp ; Fan   Out; 20 TTL load ; Rise or Fall Time ∝25ns  | 
          
          
            SWEEP   OPERATION   | 
          
          
            Rate   | 
            100:1 ratio   max. and adjustable  
              ( In order to get maximum sweep span, the sweep time   needs to be tuned on when adjust sweep span. )  | 
          
          
            Time  | 
            1Sec°30Sec   adjustable  
              ( When the sweep time is too long, the stop frequency will reach   and stay at the maximum frequency of instrument until the end of the sweep   cycle. )  | 
          
          
            Mode  | 
            Lin./Log.   switch selector  | 
          
          
            AMPLITUDE   MODULATION   | 
          
          
            Depth &   Modulation Frequency  | 
            0°100? ;   400Hz(INT), DC°1MHz(EXT)  | 
          
          
            Carrier   BW  | 
            100Hz°5MHz(-3dB)  | 
          
          
            EXT Modulation   Sensitivity  | 
            ∝ 10Vpp for 100?modulation   | 
          
          
            FREQUENCY   MODULATION   | 
          
          
            Deviation   & Modulation Frequency  | 
            0°∮50kHz,center   at 1MHz, 400Hz fixed(INT), 1kHz fixed(EXT)   | 
          
          
            EXT Modulation   Sensitivity  | 
            ∝ 10Vpp for 10% modulation (center at 1MHz)   | 
          
          
            FREQUENCY   COUNTER   | 
          
          
            Range   | 
            5Hz°150MHz   | 
          
          
            Accuracy   | 
            Time base   accuracy∮1count   | 
          
          
            Time base   | 
            ∮20ppm(23?∮5?)after 30   minutes warm up  | 
          
          
            Resolution   | 
            The maximum   resolution is 100nHz for 1Hz and 0.1Hz for 100MHz   | 
          
          
            Input   Impedance  | 
            1M?/150pf   | 
          
          
            Sensitivity  | 
            ∝ 35mVrms (5Hz~100MHz) 
            ∝ 45mVrms (100MHz~150MHz)  | 
          
          
            STORE/RECALL   FUNCTION  | 
          
          
            |   | 
            10 groups of   Setting memories   | 
          
          
            POWER   SOURCE  | 
              | 
          
          
            |   | 
            AC115V∮10%, AC   230V+10%/-15%, 50/60Hz   | 
          
          
            ACCESSORIES   | 
          
          
            |   | 
            Instruction   manual⊙1 
              Power   Cord x 1 
              GTL-101⊙ 2  | 
          
          
            DIMENSION   & WEIGHT  | 
            266(W)⊙107(H)⊙293(D)   mm 
              Approx. 3.2kg  |